Powder Dispensing Booth

HomeProduct Clean Room Equipments Powder Dispensing Booth


We are one of the most reliable powder dispensing booth manufacturers of the market. Our powder dispensing machine controls dangerous emission of powder dust during the sampling of powders. The downdraught of HEAP powder sampling system prevents airborne dust from the operator breathing space. The forced downward air is extracted at low level in the booth, where dusts are filtered prior to being circulated back into the booth’s air stream.

For mixing, weighing & dispensing of powder.  The reverse flow scavenging pre-filter at the work level ensures that aerosolysed particles are picked up at the source without allowing to disperse into the area.


Technical Specifications

TypeFront Open
Direction of flowVertical
Material of ConstructionS.S 304 / S.S 316 or MS CRCA Powder Coated
CleanlinessClass 100 as per US FED STD 209E
Particle Retention0.3 micron & above
Noise Level65 dB on On Scale 'A' ± 5
Velocity90 FPM ± 20 %
IlluminationFlourescent tubes diffusers
Pressure Differential0-25 mm inclined Manometers
Power Supply230 V single Phsae , 50 Hz
Pre-Filters10 - 15 micron rating, 3- Layers of HDPE mesh, 6mm Pressure Drop
Intermedialte Filters3 micron & above, two layers of HDPE woven mesh and one layer of Non-woven polyester Bondex Media, 9 mm Pressure Drop, Efficiency 97%
Supply HEPA Filters99.97% efficiency @ 0.3 micron ratiing
Exhaust HEPA Filters99.97% efficiency @ 0.3 micron ratiing
Blower AssemblyStatically & Dynamically balanced DIDW type blower system


Powder Dispensing Booth - 01

Powder Dispensing Booth (Powder Dispensing Booth - 01)

zoom {+}

Powder Dispensing Booth - 02

Powder Dispensing Booth (Powder Dispensing Booth - 02)

zoom {+}



Select and click Select All   |   Clear All  


Choose your language :   English Espanol Francis Deutsch Italy Portugues