-
ramnath_filtration@yahoo.com -
+91-9823012876
Powder Dispensing Booths
Specifications
| Type | Front open |
| Direction of air flow | Vertical |
| Construction | Powder coated MS CRCA/Pre-coated SS 304 |
| Cleanliness Class | Class-100 as per US Fed Std 209E |
| Particle retention | 0.3 micron and above |
| Noise level | 65 dBA on scale 'A' |
| Velocity | 90 FPM +- 10% |
| Illumination | Flourescent tupe light fixtures |
| Pressure differential | 0-25 mm Magnehelic Gauges |
| Power supply | 230 V.AC, single phase, 50 Hz |
| Pre-filters | 10-15 micron having 3 layers of HDPE, 6 mm PD |
| Supply Hepa Filters | 99.97% down to 0.3 micron |
| Exhause Hepa Filter | 99.97% down to 0.3 micron |
| Blower Assembly | Statically and dynamically balanced DIDW type. |
POWDER DISPENSING SAMPLING BOOTH
Powder Dispensing/Sampling Booths are work enclosures which provide Class-100 cleanliness in the dispensing/sampling zone. These units are used to control hazardous emissions of powder dust during powder dispensing/sampling process without any risk to the operator and product as well protecting the environment.
Intermediate filters : 3 micron and above, two layers of HDPE woven mesh and one layer of non-woven polyester bonde media. 9 mm PD, efficiency 97%
